ESA S 530

/ESA S 530
ESA S 5302018-11-20T07:04:00+00:00
ESA S 530

ESA S 530 TYPICAL APPLICATIONS

  • Conventional press-brakes (Mechanical and Hydraulic), synchro Hydraulic press-brakes,
  • Servo controlled hydraulic single cylinder press-brakes, electrically driven press-brakes, tandem press-brakes
  • Hydro-mechanical press-brakes American style.
  • Guillotine shears, with 3-4 axes.

BASIC UNIT EQUIPPED WITH CPU AMD GEODE ETX-LX800 500MHZ, 128MB DRAM INCLUDING

  • Graphics color 7” lcd tft display (800 x 480 pixels resolution).
  • 128 MB silicon disk.
  • 51 keys ip65 keyboard (33 general purpose keys plus + 18 function place on the near of the display).
  • 4 fast counting circuits for line drive 0-5Vdc differential encoders or npn/push-pull.
  • The encoders are powered at 5Vdc (max 200mA per channel).
  • 4 analog outputs(±10V) with 13bits + sign resolution.
  • 4 digital inputs for the zero micros.
  • 4 analog inputs,  12 bits resolution, range 0÷10V, 0÷5V.
  • 2 general purposes analog outputs, 0÷10V (8 bits resolution).
  • 32 digital inputs (24Vdc).
  • 32 digital outputs (24Vdc, 0,7A max.) protected against overload and short-circuits.
  • 2 serial port rs232.
  • 1 Can port with 9 pins subd f connector.
  • 1 ethernet port 10/100 Mbit (lan connection)
  • 1 VGA port for external monitor connection
  • 2 USB (2.0) ports.
  • 24Vdc power supply.

Special features.

  • Selectable and programmable axes and auxiliary functions.
  • Drivers for hydraulic axes with proportional valves or servo valves, servo drivers (a.c./d.c.), and a.c. motors with or without inverter; drivers for the most common field buses (CAN BUS).
  • Following arms, thickness detector, in- – process angle measurement units, robotic interfacing, controlling for the tandem press- – brakes.
  • Safety PLC communication (PILZ, LAZER SAFE).
  • Modem for telecommunication assistance.
  • High performances tandem machines management without added sensors requirement.
  • USB memory sticks available on all products range.
  • Fully hardware and software compatibility among all products range.
  • USB memory sticks available on all products range.
  • CNC hardware configuration (motors type & quantity, valves type & quantity, I/O type & quantity) can be edited from the CNC itself

REQUEST A FREE QUOTE NOW.