Y41 Series C-frame Single Post Hydraulic Press
The Y41 series hydraulic press is in C-frame with the single post. The whole body adopts CO2 steel plate welding. After welding, it will be processed with tempering aging treatment to ensure that there is no deformation of the body. The hydraulic system is located inside the body.
Nominal Force: 2.5-250T
Slider Stroke: 200-500mm
Max. Opening Height: 300-900mm
The Y41 series hydraulic press is in C-frame with single post. The whole body adopt CO2 steel plate welding. After welding, it will be processed with tempering aging treatment to ensure that there is no deformation of the body. The hydraulic system is located inside the body. Besides, the hydraulic press can expand the working range, using three-sided space to lengthen the hydraulic cylinder stroke (optional).
Casting Beam & Working Table
The upper beam, movable beam and working table are made of #45 cast steel casting integrated (Or adopt welded steel plate structure. The welding uses carbon dioxide gas protection welding, remove stress after welding). It has good rigidity.
Post & Guide Sleeve
The post is made of #45 round steel and chrome plated to ensure it will never rust. The sliding sleeve (guide sleeve) is made of wear-resistant cast iron and embedded with Teflon wear-resistant material to prevent the post from strain and has good anti- deflection capability.
Advanced Hydraulic System
The machine has an independent and advanced hydraulic system, which is arranged on the right side of the main engine to provide a controllable hydraulic power source for the press. The fuel tank is a steel plate welding piece, adopting closed structure. After artificial grinding, paste, pickling, phosphating treatment to ensure cleanliness.
The hydraulic pipeline adopts cold drawn seamless steel pipe. After welding, polishing, pickling, neutralization, phosphating, cleaning, blow-drying, oiling and other processes, it enters the installation. The piping arrangement is clear, tidy. The bending radius of the high-pressure pipe is very normal. The high and low-pressure tube has an obvious color distinction.
The hydraulic cylinder is a piston structure. The cylinder body is selected with #45 tube with a good finish of the inner hole. Large cylinder is made of 45# forged steel. The piston rod is #45 round steel. The surface is hardened by medium frequency. After grinding, go through the chrome plating process. It featured wear resistance, rust resistance and long service life
The electrical system consists of two parts: the power cabinet and the operating station. The electric power adopts a three-phase four-wire power supply system. The electrical system is controlled by the relay (PLC control optional), and to achieve electro-hydraulic control with the hydraulic valve to complete various process action cycle.
|Max.Pressure of Liquid||Mpa||5||7.9||8||8.1||13||20.3||22.6||24.7||26.3||19.9||25|
|Max. Opening Height||mm||300||390||450||500||550||600||700||800||800||900||900|
|Max. Stroke of Slider||mm||200||200||250||300||350||350||400||500||500||500||500|
|Down Speed of Slider||mm/s||42||45||45||45||45||45||49||53||36||24||23|
|Return Speed of Slider||mm/s||70||75||85||75||75||100||85||95||76||65||55|
|Height from Worktable to Ground||mm||700||700||700||700||700||700||700||700||700||700||700|
|Blanking Hole Dia.||mm||70||70||80||80||80||80||100||120||120||100||200|
|Oil Pump||–||Vane Pump||Piston Pump|
|Height Above the Ground||mm||1565||1650||1725||1900||1990||2200||2250||2650||2650||1960||2500|
Click below download button to get our PDF version catalog.